火焰和气体监测系统

Zero Two 系列火灾和气体检测系统

此模块系统提供最广泛的控制卡系列,以供在集成式火灾和/或气体检测系统中使用。Zero Two 系列系统可监测以下各项的任意组合:可燃气体、硫化氢、有毒气体、超声波、氧气不足和火焰检测。此外,其开放式架构使得系统可以容纳其他传感器设备,以用于各种任务,如烟雾检测、热检测和手动报警点。 
了解详情

TA102A Single Channel Combustible Trip Amplifier Module

The TA102A is a single-channel Combustible Gas Trip Amplifier Module designed for use with one General Monitors intelligent transmitter to monitor combustible gases and vapors within the lower explosive limit (LEL) and provide status indication and alarm outputs. Microprocessor-based electronics allow all options to be user selectable through a front panel interface (mode / select switch and digital display). A digital display indicates fault codes and set up options. Other features include: LED indications of status, as well as both open collector and relay outputs for fault, low alarm and high alarm.
了解详情

4802A Zero Two 系列控制模块,用于可燃气体应用场合

4802A 是一个单通道可燃气体控制模块,专为与我们的经过验证的催化珠传感器一同使用而设计。它用于监测具有低爆炸下限 (LEL) 浓度的可燃气体和蒸气,并提供状态指示和报警输出。基于微处理器的电子装置允许用户通过前面板界面来选择所有选项。数字显示屏指示气体浓度、故障码、标定提示和设置选项。其他功能:状态的 LED 指示,以及集电极开路和继电器输出。
了解详情

610A 四通道可燃气体监视器

610A 是一个用于连续监测四个位置的可燃(烃类)气体浓度的系统。此系统包括四个独立通道,每个通道有自己的回路。610A 以 % LEL(0-99% 爆炸下限)的形式为每个通道提供气体浓度的数字显示。
了解详情

580A 双通道可燃气体监视器

580A 是一个紧凑的高度通用系统,用于两个位置的可燃气体(烃类)浓度的持续监测。系统包括两个远程催化传感部件和一个固态控制器。控制器在数字显示屏上自动显示较高读数通道,量程为 0-100% LEL(爆炸下限)。手动超驰开关允许随时读取低读数通道的读数。
了解详情

TA202A Single Channel H2S Trip Amplifier Module

The TA202A is a single-channel H2S Trip Amplifier Module for use with our H2S Intelligent Sensors. It is designed to monitor H2S in parts per million (ppm) levels and provide status indication and alarm outputs. Microprocessor-based electronics allow all options to be user selectable through front panel interface (mode / select switch and digital display).
了解详情

2280A 四通道硫化氢气体监视器

2280A 是一个用于监测四个位置的硫化氢气体浓度的系统。此系统包括四个远程安装的传感器和一个固态控制器。控制器包括四个独立通道,每个通道有自己的回路。2280A 利用数字显示屏为每个通道显示范围在 0-20、0-50 或者 0-99 ppm(百万分率)的气体浓度。
了解详情

2602A Zero Two Series Control Module for H2S Applications

The 2602A is a single-channel H2S Control Module that has been designed to monitor H2S in parts per million (ppm) levels and provide status indication and alarm outputs. Microprocessor-based electronics allow all options to be user selectable through front panel interface (mode / select switch and digital display). The digital display on the 2602A indicates hydrogen sulfide gas concentration, fault codes, calibration cues and setup options. Other features include LED indications of status, relay outputs for fault, low alarm and high alarm, and serial communications ports.
了解详情

TA402A Single Channel Trip Amplifier

The Model TA402A is a single-channel trip amplifier module designed for use with the FL3100 Series Flame Detectors, providing status indication and alarm outputs.
了解详情

FL802 Multi-Channel Flame Detection Readout / Relay Display Module

The Model FL802 is a compact, reliable and versatile multi-channel flame detection readout/relay display module designed to monitor up to eight remote FL4000H or FL3100 Series detectors.
了解详情

DC110 Eight Channel Combustible Readout / Relay Module

The DC110 is an eight-channel Readout / Relay Module designed to be used with up to eight of our remotely located Combustible Intelligent Sensors. The front panel contains a digital display that indicates 0-99% LEL (lower explosive limit) of the combustible gas being monitored by the Intelligent Sensors.
了解详情

TA502A Single Channel Trip Amplifier Module

The TA502A is a single-channel generic trip amplifier designed for use in Zero Two Series Gas and Flame Detection Systems. It is used to process the 0-22 mA signal from any field mounted transmitter.
了解详情

CC02A Serial Communications Module

The CC02A Communications Card facilitates serial communications between each module in a Zero Two Series Flame and Gas Detection System and an external host computer, which allows fast access to operational and setup data registers. It supports a Burst Read feature that returns all registers of a module in a single transmission.
了解详情

DT210 Eight Channel H2S Readout / Relay Module

The DT210 is an eight-channel Readout / Relay Module designed for use with up to eight of our remotely located H2S Intelligent Sensors. The front panel contains a digital display that indicates 0-20 ppm (parts per million), 0-50 ppm, or 0-99 ppm of the hydrogen sulfide gas monitored by the Intelligent Sensors.
了解详情

FM002A Facilities Module

The FM002A is a facilities module that provides a range of common facilities for all Zero Two control modules housed in the chassis. The FM002A is plugged into the last slot on the right-hand side of the Zero Two chassis. It may be daisy-chained allowing one FM002A to serve up to 100 Zero Two modules in any combination.
了解详情

IN042 Four Zone Control Module

The IN042 is a four zone input module designed for use with two-wire field devices such as smoke or heat detectors, pull switches and manual callpoints. It is designed to monitor these devices and provide both status indication and fault / alarm outputs for each zone.
了解详情

MD002 Monitored Driver Output Module

The MD002 is a monitored driver output module designed for four independent outputs requiring monitoring in their non-active state, such as extinguishing solenoids, beacons, horns, etc. Each driver is independent and has circuitry to monitor short and open circuits in field wiring.
了解详情

ZN002A Three Zone Control Module

The ZN002A is a Zone Control Module for the Zero Two Series Fire and Gas Detection System. The ZN002A provides zoning and voting functions for three separate and independent zones of gas and / or flame detection.
了解详情
产品比较列表 (0) 比较产品